Exception Handling

The functions described in this chapter will let you handle and raise Python exceptions. It is important to understand some of the basics of Python exception handling. It works somewhat like the Unix errno variable: there is a global indicator (per thread) of the last error that occurred. Most functions don’t clear this on success, but will set it to indicate the cause of the error on failure. Most functions also return an error indicator, usually NULL if they are supposed to return a pointer, or -1 if they return an integer (exception: the PyArg_* functions return 1 for success and 0 for failure).

When a function must fail because some function it called failed, it generally doesn’t set the error indicator; the function it called already set it. It is responsible for either handling the error and clearing the exception or returning after cleaning up any resources it holds (such as object references or memory allocations); it should not continue normally if it is not prepared to handle the error. If returning due to an error, it is important to indicate to the caller that an error has been set. If the error is not handled or carefully propagated, additional calls into the Python/C API may not behave as intended and may fail in mysterious ways.

The error indicator consists of three Python objects corresponding to the result of sys.exc_info(). API functions exist to interact with the error indicator in various ways. There is a separate error indicator for each thread.

void PyErr_Print()
Print a standard traceback to sys.stderr and clear the error indicator. Call this function only when the error indicator is set. (Otherwise it will cause a fatal error!)
PyObject* PyErr_Occurred()
Return value: Borrowed reference.

Test whether the error indicator is set. If set, return the exception type (the first argument to the last call to one of the PyErr_Set* functions or to PyErr_Restore). If not set, return NULL. You do not own a reference to the return value, so you do not need to Py_DECREF it.

Note

Do not compare the return value to a specific exception; use PyErr_ExceptionMatches instead, shown below. (The comparison could easily fail since the exception may be an instance instead of a class, in the case of a class exception, or it may the a subclass of the expected exception.)

int PyErr_ExceptionMatches(PyObject *exc)
Equivalent to PyErr_GivenExceptionMatches(PyErr_Occurred(), exc). This should only be called when an exception is actually set; a memory access violation will occur if no exception has been raised.
int PyErr_GivenExceptionMatches(PyObject *given, PyObject *exc)
Return true if the given exception matches the exception in exc. If exc is a class object, this also returns true when given is an instance of a subclass. If exc is a tuple, all exceptions in the tuple (and recursively in subtuples) are searched for a match.
void PyErr_NormalizeException(PyObject**exc, PyObject**val, PyObject**tb)
Under certain circumstances, the values returned by PyErr_Fetch below can be “unnormalized”, meaning that *exc is a class object but *val is not an instance of the same class. This function can be used to instantiate the class in that case. If the values are already normalized, nothing happens. The delayed normalization is implemented to improve performance.
void PyErr_Clear()
Clear the error indicator. If the error indicator is not set, there is no effect.
void PyErr_Fetch(PyObject **ptype, PyObject **pvalue, PyObject **ptraceback)

Retrieve the error indicator into three variables whose addresses are passed. If the error indicator is not set, set all three variables to NULL. If it is set, it will be cleared and you own a reference to each object retrieved. The value and traceback object may be NULL even when the type object is not.

Note

This function is normally only used by code that needs to handle exceptions or by code that needs to save and restore the error indicator temporarily.

void PyErr_Restore(PyObject *type, PyObject *value, PyObject *traceback)

Set the error indicator from the three objects. If the error indicator is already set, it is cleared first. If the objects are NULL, the error indicator is cleared. Do not pass a NULL type and non-NULL value or traceback. The exception type should be a class. Do not pass an invalid exception type or value. (Violating these rules will cause subtle problems later.) This call takes away a reference to each object: you must own a reference to each object before the call and after the call you no longer own these references. (If you don’t understand this, don’t use this function. I warned you.)

Note

This function is normally only used by code that needs to save and restore the error indicator temporarily; use PyErr_Fetch to save the current exception state.

void PyErr_SetString(PyObject *type, const char *message)
This is the most common way to set the error indicator. The first argument specifies the exception type; it is normally one of the standard exceptions, e.g. PyExc_RuntimeError. You need not increment its reference count. The second argument is an error message; it is converted to a string object.
void PyErr_SetObject(PyObject *type, PyObject *value)
This function is similar to PyErr_SetString but lets you specify an arbitrary Python object for the “value” of the exception.
PyObject* PyErr_Format(PyObject *exception, const char *format, ...)
Return value: Always NULL.

This function sets the error indicator and returns NULL. exception should be a Python exception (class, not an instance). format should be a string, containing format codes, similar to printf. The width.precision before a format code is parsed, but the width part is ignored.

Format Characters Type Comment
%% n/a The literal % character.
%c int A single character, represented as an C int.
%d int Exactly equivalent to printf("%d").
%u unsigned int Exactly equivalent to printf("%u").
%ld long Exactly equivalent to printf("%ld").
%lu unsigned long Exactly equivalent to printf("%lu").
%zd Py_ssize_t Exactly equivalent to printf("%zd").
%zu size_t Exactly equivalent to printf("%zu").
%i int Exactly equivalent to printf("%i").
%x int Exactly equivalent to printf("%x").
%s char* A null-terminated C character array.
%p void* The hex representation of a C pointer. Mostly equivalent to printf("%p") except that it is guaranteed to start with the literal 0x regardless of what the platform’s printf yields.

An unrecognized format character causes all the rest of the format string to be copied as-is to the result string, and any extra arguments discarded.

void PyErr_SetNone(PyObject *type)
This is a shorthand for PyErr_SetObject(type, Py_None).
int PyErr_BadArgument()
This is a shorthand for PyErr_SetString(PyExc_TypeError, message), where message indicates that a built-in operation was invoked with an illegal argument. It is mostly for internal use.
PyObject* PyErr_NoMemory()
Return value: Always NULL.

This is a shorthand for PyErr_SetNone(PyExc_MemoryError); it returns NULL so an object allocation function can write return PyErr_NoMemory(); when it runs out of memory.

PyObject* PyErr_SetFromErrno(PyObject *type)
Return value: Always NULL.

This is a convenience function to raise an exception when a C library function has returned an error and set the C variable errno. It constructs a tuple object whose first item is the integer errno value and whose second item is the corresponding error message (gotten from strerror), and then calls PyErr_SetObject(type, object). On Unix, when the errno value is EINTR, indicating an interrupted system call, this calls PyErr_CheckSignals, and if that set the error indicator, leaves it set to that. The function always returns NULL, so a wrapper function around a system call can write return PyErr_SetFromErrno(type); when the system call returns an error.

PyObject* PyErr_SetFromErrnoWithFilename(PyObject *type, const char *filename)
Return value: Always NULL.

Similar to PyErr_SetFromErrno, with the additional behavior that if filename is not NULL, it is passed to the constructor of type as a third parameter. In the case of exceptions such as IOError and OSError, this is used to define the filename attribute of the exception instance.

PyObject* PyErr_SetFromWindowsErr(int ierr)
Return value: Always NULL.

This is a convenience function to raise WindowsError. If called with ierr of 0, the error code returned by a call to GetLastError is used instead. It calls the Win32 function FormatMessage to retrieve the Windows description of error code given by ierr or GetLastError, then it constructs a tuple object whose first item is the ierr value and whose second item is the corresponding error message (gotten from FormatMessage), and then calls PyErr_SetObject(PyExc_WindowsError, object). This function always returns NULL. Availability: Windows.

PyObject* PyErr_SetExcFromWindowsErr(PyObject *type, int ierr)
Return value: Always NULL.

Similar to PyErr_SetFromWindowsErr, with an additional parameter specifying the exception type to be raised. Availability: Windows.

PyObject* PyErr_SetFromWindowsErrWithFilename(int ierr, const char *filename)
Return value: Always NULL.

Similar to PyErr_SetFromWindowsErr, with the additional behavior that if filename is not NULL, it is passed to the constructor of WindowsError as a third parameter. Availability: Windows.

PyObject* PyErr_SetExcFromWindowsErrWithFilename(PyObject *type, int ierr, char *filename)
Return value: Always NULL.

Similar to PyErr_SetFromWindowsErrWithFilename, with an additional parameter specifying the exception type to be raised. Availability: Windows.

void PyErr_BadInternalCall()
This is a shorthand for PyErr_SetString(PyExc_SystemError, message), where message indicates that an internal operation (e.g. a Python/C API function) was invoked with an illegal argument. It is mostly for internal use.
int PyErr_WarnEx(PyObject *category, char *message, int stacklevel)

Issue a warning message. The category argument is a warning category (see below) or NULL; the message argument is a message string. stacklevel is a positive number giving a number of stack frames; the warning will be issued from the currently executing line of code in that stack frame. A stacklevel of 1 is the function calling PyErr_WarnEx, 2 is the function above that, and so forth.

This function normally prints a warning message to sys.stderr; however, it is also possible that the user has specified that warnings are to be turned into errors, and in that case this will raise an exception. It is also possible that the function raises an exception because of a problem with the warning machinery (the implementation imports the warnings module to do the heavy lifting). The return value is 0 if no exception is raised, or -1 if an exception is raised. (It is not possible to determine whether a warning message is actually printed, nor what the reason is for the exception; this is intentional.) If an exception is raised, the caller should do its normal exception handling (for example, Py_DECREF owned references and return an error value).

Warning categories must be subclasses of Warning; the default warning category is RuntimeWarning. The standard Python warning categories are available as global variables whose names are PyExc_ followed by the Python exception name. These have the type PyObject*; they are all class objects. Their names are PyExc_Warning, PyExc_UserWarning, PyExc_UnicodeWarning, PyExc_DeprecationWarning, PyExc_SyntaxWarning, PyExc_RuntimeWarning, and PyExc_FutureWarning. PyExc_Warning is a subclass of PyExc_Exception; the other warning categories are subclasses of PyExc_Warning.

For information about warning control, see the documentation for the warnings module and the -W option in the command line documentation. There is no C API for warning control.

int PyErr_WarnExplicit(PyObject *category, const char *message, const char *filename, int lineno, const char *module, PyObject *registry)
Issue a warning message with explicit control over all warning attributes. This is a straightforward wrapper around the Python function warnings.warn_explicit(), see there for more information. The module and registry arguments may be set to NULL to get the default effect described there.
int PyErr_CheckSignals()

This function interacts with Python’s signal handling. It checks whether a signal has been sent to the processes and if so, invokes the corresponding signal handler. If the signal module is supported, this can invoke a signal handler written in Python. In all cases, the default effect for SIGINT is to raise the KeyboardInterrupt exception. If an exception is raised the error indicator is set and the function returns -1; otherwise the function returns 0. The error indicator may or may not be cleared if it was previously set.

void PyErr_SetInterrupt()

This function simulates the effect of a SIGINT signal arriving — the next time PyErr_CheckSignals is called, KeyboardInterrupt will be raised. It may be called without holding the interpreter lock.

int PySignal_SetWakeupFd(int fd)
This utility function specifies a file descriptor to which a '\0' byte will be written whenever a signal is received. It returns the previous such file descriptor. The value -1 disables the feature; this is the initial state. This is equivalent to signal.set_wakeup_fd() in Python, but without any error checking. fd should be a valid file descriptor. The function should only be called from the main thread.
PyObject* PyErr_NewException(char *name, PyObject *base, PyObject *dict)
Return value: New reference.

This utility function creates and returns a new exception object. The name argument must be the name of the new exception, a C string of the form module.class. The base and dict arguments are normally NULL. This creates a class object derived from Exception (accessible in C as PyExc_Exception).

The __module__ attribute of the new class is set to the first part (up to the last dot) of the name argument, and the class name is set to the last part (after the last dot). The base argument can be used to specify alternate base classes; it can either be only one class or a tuple of classes. The dict argument can be used to specify a dictionary of class variables and methods.

void PyErr_WriteUnraisable(PyObject *obj)

This utility function prints a warning message to sys.stderr when an exception has been set but it is impossible for the interpreter to actually raise the exception. It is used, for example, when an exception occurs in an __del__() method.

The function is called with a single argument obj that identifies the context in which the unraisable exception occurred. The repr of obj will be printed in the warning message.

Standard Exceptions

All standard Python exceptions are available as global variables whose names are PyExc_ followed by the Python exception name. These have the type PyObject*; they are all class objects. For completeness, here are all the variables:

C Name Python Name Notes
PyExc_BaseException BaseException (1)
PyExc_Exception Exception (1)
PyExc_ArithmeticError ArithmeticError (1)
PyExc_LookupError LookupError (1)
PyExc_AssertionError AssertionError  
PyExc_AttributeError AttributeError  
PyExc_EOFError EOFError  
PyExc_EnvironmentError EnvironmentError (1)
PyExc_FloatingPointError FloatingPointError  
PyExc_IOError IOError  
PyExc_ImportError ImportError  
PyExc_IndexError IndexError  
PyExc_KeyError KeyError  
PyExc_KeyboardInterrupt KeyboardInterrupt  
PyExc_MemoryError MemoryError  
PyExc_NameError NameError  
PyExc_NotImplementedError NotImplementedError  
PyExc_OSError OSError  
PyExc_OverflowError OverflowError  
PyExc_ReferenceError ReferenceError (2)
PyExc_RuntimeError RuntimeError  
PyExc_SyntaxError SyntaxError  
PyExc_SystemError SystemError  
PyExc_SystemExit SystemExit  
PyExc_TypeError TypeError  
PyExc_ValueError ValueError  
PyExc_WindowsError WindowsError (3)
PyExc_ZeroDivisionError ZeroDivisionError  

Notes:

  1. This is a base class for other standard exceptions.
  2. This is the same as weakref.ReferenceError.
  3. Only defined on Windows; protect code that uses this by testing that the preprocessor macro MS_WINDOWS is defined.

Table Of Contents

Previous topic

Reference Counting

Next topic

Utilities

This Page